New design introduces a solid Stainless Steel tube construction. This makes the stand even more resistant for possible vibrations. Most sturdy and simple solution for holding and support of microscopes. This stand can be set at the desired height and then easily swung to the side for work that does not require a microscope. Depending on your personal setup, this Stand can be fixed on the back wall of the bench, swell as bench top! The stand for MEIJI Includes a focusing block with an internal diameter of 84 mm.
For conventional jura style bench mounting: The Jura microscope stand can be mounted on a Jura style bench with a mounting wall that is no more than 18" away from the front edge of the bench top. The Jura microscope stand is not designed for wall mounting behind the typical jewelers workbench, as the maximum extension of the 1-3/8" diameter horizontal tube front to back is 12". The larger 1-5/8" diameter vertical tube, which fits into the 4-hole mounting bracket, measures 16-3/4" (425mm) long.
For direct bench top mounting: The new version of the Jura microscope stand can now be mounted directly to a bench top. For directly bolting the vertical tube to your workbench, you will need access to the underside of your bench in order to fix the mounting hardware. The new version includes a longer vertical tube, now 16-3/4" (425mm) long, which will give you the required working distance between your scope and your micro-block. The new version includes a mounting ring and bolt. You will need to drill a 3/8" diameter hole in your bench to mount the stand in this manner. The mounting bolt supplied will allow for a maximum bench top thickness of 1-1/2". For thicker tops you will need to source a longer bolt. The adjustments for the stand are made with the same universal JURA Hex key.
Mounting Note: Before mounting the Jura microscope stand please note that the stand holds the scope off center to your right while looking at the stand. If you wish to have your microscope centered on your bench, you will need to attach the 4-hole mounting bracket to the left of center on your bench.
