The JURA E-Type Hand pieces for JURA Micromotor, Graver Plus and Graver Pro systems. Feels like a pen in the hand due to its Slim Ergonomic Nose. No vibration & Silent ! The JURA handpiece is quickly interchangeable with other handpieces. No need for a separate micromotor and Fits on most E-Type Micromotors! This Handpiece Is the lightest and the shortest handpiece that reduced strengthening of your hand while making long hours doing the finest pave work. This hand piece is designed for delicate pave work with recommended ball bur size up to 1,8mm. Jura recommends:
- For Drill Bits & Ball Burs 3-4000rpm.
- For Cylinders & Tapered Burs 5-6000rpm.
Important Usage Note:
- Using a JURA E-Type micromotor is not the same as using a traditional hanging motor. This is a delicate, precision-based system. Always increase ball bur sizes gradually (from small to large) to maintain full control and achieve fine results.
- Avoid using cheap ball burs or mandrels — especially mandrels — as they can damage the bearings and shorten the life of your handpiece.
Vendor SKU: EQ.14.01
